MODEL: Cactus by nobiax - inc variants

[cdxbow]

Also from Nobiax Mundi pack is the cactus mesh. The original is a 3 arm job, see image below:

I converted the mesh to md3 and reduced the graphics to 512 x 512. After that I progressively disarmed the model, so there are now 4 meshes, one with no arms, one with 1 arm and one with the classic 2 arm hold up pose. The 4 meshes, configs and graphics are less than 500KB and are in the att. cacti.rar

[Julius]

Again nice set.

OT: Are there plans to make the Meks HUD look more cockpit like? There is a really nice set of highly (sci-fi airplane) cockpit meshes available on Blenderswap (currently down for maintenance/upgrade) if you need a good base.

[cdxbow]

The cockpit models are an embarrassment, 2 discs, 2 boxes and 2 cylinders with a dodgey texture chucked on. They do need to be redone, but they are not a priority at this stage, I will have a look at those cockpits

[Julius]

I think this:
http://www.blendswap.com/blends/view/45973
was the .blend that included the cockpits.