Problem compiling V0.2rc1

Re: MeAndMyShadow V0.2 RC1

Postby Edward_Lii » 05 Jan 2012, 23:06

Hello ctdabomb

ctdabomb {l Wrote}:Yup, you were right.

CMake Error at CMakeLists.txt:39 (message):
LIBARCHIVE not found !

I assume you have libarchive-dev installed?
There's a problem that Ubuntu doesn't seem to have the needed cmake Module.
I'll try to find a solution for this.
From,
Edward_Lii
User avatar
Edward_Lii
MnMS Moderator
 
Posts: 777
Joined: 20 Dec 2010, 16:46

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:07

installing now, (after i saw the problem)
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:11

I installed it and got the same error. :(
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby Edward_Lii » 05 Jan 2012, 23:13

Hello ctdabomb,

ctdabomb {l Wrote}:I installed it and got the same error. :(

I was afraid so, I think I got a temporary solution.
Could you replace the file CMakeLists.txt with this:
{l Code}: {l Select All Code}
PROJECT(meandmyshadow)
CMAKE_MINIMUM_REQUIRED(VERSION 2.6)


Find_Package(SDL REQUIRED)
Find_Package(SDL_ttf REQUIRED)
Find_Package(SDL_image REQUIRED)
Find_Package(SDL_mixer REQUIRED)
Set(SDLGFX_LIBRARY SDL_gfx)
Set(SDLGFX_INCLUDE_DIR ${SDL_INCLUDE_DIR}/SDL_gfx)
Find_Package(CURL REQUIRED)
Set(LibArchive_LIBRARY archive)
Set(LibArchive_INCLUDE_DIR /usr/include/)

INCLUDE_DIRECTORIES(${SDL_INCLUDE_DIR})
INCLUDE_DIRECTORIES(${SDLIMAGE_INCLUDE_DIR})
INCLUDE_DIRECTORIES(${SDLMIXER_INCLUDE_DIR})
INCLUDE_DIRECTORIES(${SDLTTF_INCLUDE_DIR})
INCLUDE_DIRECTORIES(${SDLGFX_INCLUDE_DIR})
INCLUDE_DIRECTORIES(${CURL_INCLUDE_DIR})
INCLUDE_DIRECTORIES(${LibArchive_INCLUDE_DIR})

if ( NOT SDL_FOUND )
    message(FATAL_ERROR "SDL not found !")
endif ( NOT SDL_FOUND )

if ( NOT SDLTTF_FOUND )
    message(FATAL_ERROR "SDL_ttf not found !")
endif ( NOT SDLTTF_FOUND )

if ( NOT SDLMIXER_FOUND )
    message(FATAL_ERROR "SDL_mixer not found !")
endif ( NOT SDLMIXER_FOUND )

if ( NOT CURL_FOUND )
    message(FATAL_ERROR "CURL not found !")
endif ( NOT CURL_FOUND )


configure_file (
  "${PROJECT_SOURCE_DIR}/src/config.h.in"
  "${PROJECT_BINARY_DIR}/config.h"
  )

set(EXECUTABLE_OUTPUT_PATH ${PROJECT_BINARY_DIR})
set(SRC_DIR ${PROJECT_SOURCE_DIR}/src)

include_directories(
   ${PROJECT_BINARY_DIR}
   ${SDL_INCLUDE_DIR}
   ${SDLTTF_INCLUDE_DIR}
   ${SDLMIXER_INCLUDE_DIR}
   ${SDLIMAGE_INCLUDE_DIR}
   ${SDLGFX_INCLUDE_DIR}
)

SET(CMAKE_CXX_FLAGS "-Wall -g")

# Déclaration de l'exécutable
file(GLOB Sources ${SRC_DIR}/*.cpp)
add_executable(meandmyshadow ${Sources})

target_link_libraries(
    meandmyshadow
    ${SDL_LIBRARY}
   ${SDLTTF_LIBRARY}
   ${SDLIMAGE_LIBRARY}
   ${SDLMIXER_LIBRARY}
   ${SDLGFX_LIBRARY}
    ${CURL_LIBRARY}
    ${LibArchive_LIBRARY}
)

install(DIRECTORY ${PROJECT_BINARY_DIR}/data DESTINATION share/meandmyshadow/)
install(TARGETS meandmyshadow RUNTIME DESTINATION bin)
if("${CMAKE_SYSTEM_NAME}" MATCHES "Linux")
   install(FILES meandmyshadow.desktop DESTINATION share/applications/)
   install(FILES meandmyshadow.xpm DESTINATION share/pixmaps/)
endif("${CMAKE_SYSTEM_NAME}" MATCHES "Linux")
 

It will not give you an error, but that doesn't mean it works.
You can still get errors when running the make command.
From,
Edward_Lii
User avatar
Edward_Lii
MnMS Moderator
 
Posts: 777
Joined: 20 Dec 2010, 16:46

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:14

okay, so I replace the text and then try again?
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby Edward_Lii » 05 Jan 2012, 23:15

Hello ctdabomb,

ctdabomb {l Wrote}:okay, so I replace the text and then try again?

Yup, after replacing the text you run cmake . again followed by make.
From,
Edward_Lii
User avatar
Edward_Lii
MnMS Moderator
 
Posts: 777
Joined: 20 Dec 2010, 16:46

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:16

error again :(
-- The CXX compiler identification is unknown
CMake Error: your CXX compiler: "CMAKE_CXX_COMPILER-NOTFOUND" was not found. Please set CMAKE_CXX_COMPILER to a valid compiler path or name.
-- Configuring incomplete, errors occurred!
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby Edward_Lii » 05 Jan 2012, 23:18

Hello ctdabomb,

ctdabomb {l Wrote}:error again :(
-- The CXX compiler identification is unknown
CMake Error: your CXX compiler: "CMAKE_CXX_COMPILER-NOTFOUND" was not found. Please set CMAKE_CXX_COMPILER to a valid compiler path or name.
-- Configuring incomplete, errors occurred!

This message is about the compiler tools.
You can easily install them using this command:
{l Code}: {l Select All Code}
sudo apt-get install build-essential

Also make sure that g++ is installed.
From,
Edward_Lii
User avatar
Edward_Lii
MnMS Moderator
 
Posts: 777
Joined: 20 Dec 2010, 16:46

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:22

cmake worked!
building make now!
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:23

make got some errors.
http://www.pasteall.org/27939
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby Edward_Lii » 05 Jan 2012, 23:25

Hello ctdabomb,

ctdabomb {l Wrote}:make got some errors.
http://www.pasteall.org/27939

Oh, that must be libsdl-gfx1.2-dev.
It can also slip through the CMakeList since some distro's don't provide a CMake module for it.

So you have to install libsdl-gfx1.2-dev and then run cmake . again.
From,
Edward_Lii
User avatar
Edward_Lii
MnMS Moderator
 
Posts: 777
Joined: 20 Dec 2010, 16:46

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:26

whee! this is fun!
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby Edward_Lii » 05 Jan 2012, 23:29

Hello ctdabomb,

ctdabomb {l Wrote}:whee! this is fun!

I assume you mean it works. ;)

I'm really sorry for the problems, I'm hoping to fix them soon.
Especially the libarchive problem which will probably affect multiple distros.
From,
Edward_Lii
User avatar
Edward_Lii
MnMS Moderator
 
Posts: 777
Joined: 20 Dec 2010, 16:46

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:30

yes it works... at least it make an executable, thanks so much for your help! i will test your game now and tell you what I think.
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:31

if I ever want to install anything like this again i do that same stuff, right?
thanks again for your help!
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby Edward_Lii » 05 Jan 2012, 23:35

Hello ctdabomb,

ctdabomb {l Wrote}:if I ever want to install anything like this again i do that same stuff, right?
thanks again for your help!

Generally speaking yes.
If you download the source of a project it most likely contains a README, COMPILE or INSTALL file which contains instructions on howto compile it.
It isn't always cmake . it can also be qmake or ./configure or something different.

And most of the time the first command warns you when something isn't "found" (installed).
From,
Edward_Lii
User avatar
Edward_Lii
MnMS Moderator
 
Posts: 777
Joined: 20 Dec 2010, 16:46

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:39

this game is cool! really fun! the tutorial levels get a bit annoying, but i usually don't like things like that.
GOOD JOB!!!
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby Edward_Lii » 05 Jan 2012, 23:41

Hello ctdabomb,

ctdabomb {l Wrote}:this game is cool! really fun! the tutorial levels get a bit annoying, but i usually don't like things like that.

Thanks, I think that's where tutorials are for: to get bored. :p

ctdabomb {l Wrote}:GOOD JOB!!!

Thanks again. :)
From,
Edward_Lii
User avatar
Edward_Lii
MnMS Moderator
 
Posts: 777
Joined: 20 Dec 2010, 16:46

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:46

level 23 (shadow swap i think) didn't work the first time. I did what the sign said, but it didn't work. either it was a bug or an id10t error
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby Edward_Lii » 05 Jan 2012, 23:49

Hello ctdabomb,

ctdabomb {l Wrote}:level 23 (shadow swap i think) didn't work the first time. I did what the sign said, but it didn't work. either it was a bug or an id10t error

I think I know what happened.
When you try the swapping while the player is in front of a shadow block it will fail.
Because if the swap would proceed the shadow would be inside a shadow block causing strange collision errors.

It should play a sound, not sure it's clear enough tough.

Thanks for testing! :)
From,
Edward_Lii
User avatar
Edward_Lii
MnMS Moderator
 
Posts: 777
Joined: 20 Dec 2010, 16:46

Re: MeAndMyShadow V0.2 RC1

Postby ctdabomb » 05 Jan 2012, 23:59

AMAZING!!!!
AMAZING!!!!
AMAZING!!!!
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: MeAndMyShadow V0.2 RC1

Postby Edward_Lii » 06 Jan 2012, 00:05

Hello ctdabomb,

ctdabomb {l Wrote}:AMAZING!!!!
AMAZING!!!!
AMAZING!!!!

I'm glad you like it! :D

If there's any feedback you like to give, feel free to do so.
One important thing that we need is content, more levels.

BTW, I'm going to split these post of the topic and give them their own topic. ;)
From,
Edward_Lii
User avatar
Edward_Lii
MnMS Moderator
 
Posts: 777
Joined: 20 Dec 2010, 16:46

Re: Problem compiling V0.2rc1

Postby ctdabomb » 06 Jan 2012, 00:36

i can probably make some levels.
Some people are like slinkies... not really good for anything, but you still can't help smiling when you shove them down the stairs.
ctdabomb
SuperTux Moderator
 
Posts: 1075
Joined: 13 Dec 2011, 21:21
Location: halfway there

Re: Problem compiling V0.2rc1

Postby Edward_Lii » 06 Jan 2012, 07:42

Hello ctdabomb,

ctdabomb {l Wrote}:i can probably make some levels.

That would be great! ;)
From,
Edward_Lii
User avatar
Edward_Lii
MnMS Moderator
 
Posts: 777
Joined: 20 Dec 2010, 16:46

Re: MeAndMyShadow V0.2 RC1

Postby qwanom » 08 Mar 2012, 21:41

Edward_Lii {l Wrote}:/home/ctdabomb/Downloads/meandmyshadow-0.2rc1 then what?

If you got the terminal window open you can navigate using the cd command.
So by running this command you will enter the meandmyshadow path:
{l Code}: {l Select All Code}
cd /home/ctdabomb/Downloads/meandmyshadow-0.2rc1

Followed by an enter, to let the command be executed.
Now you can continue with the other commands, write:
{l Code}: {l Select All Code}
cmake .
Followed by a enter.
{l Code}: {l Select All Code}
make
Followed by an enter

If it compiles without errors you can run:
{l Code}: {l Select All Code}
./meandmyshadow
[/quote]

Thank You very much for this Big Help and so Nice Game! You have a big patience to explain how to compile to newbies like me ;)
This was my first compiled app and thanks to this topic I made it well! My problem was next: I have a Linux based distribution called Mint 9 x64 Isadora (Gnome), wich is based on Ubuntu 10.04 Lucid Lynx. Those package you said, for example- libSDL in Ubuntu packages is called libsdl-net1.2, also I realized that libsdl-net1.2-dev need to be installed.
Mint 9 Isadora x64=Ubuntu 10.04, Asus M2N-E SLI, Athlon 64X2 4000+[2.11GHz], 2GB DDR2, GPU: GeForce Palit GTS 250 E-Green 1GB.
User avatar
qwanom
 
Posts: 3
Joined: 08 Mar 2012, 21:26

Who is online

Users browsing this forum: No registered users and 1 guest